Ceiling Mounted PIR LED Motion Sensor Light, 18W Ultrathin

The SINCELIGHT LED Motion Sensor Light Fixture is an integrative close-to-ceiling light with an ultrathin design, equipped with a motion detector and light sensor (Dusk to Dawn sensor). It features a switch on the light with a dual sensing mode.

The luminaire employs an edge-emitting design and is equipped with a double-sided frosted plate, diffuser plate, and PMMA light guide plate with a laser dot, offering an elegant appearance with a diameter of 8.66 inches and a slim profile of just 18mm.

Users can easily install the LED Motion Sensor Panel Light on the ceiling or wall using the enclosed screws, and maintenance is straightforward by unscrewing two screws to remove the lamp.

The SINCELIGHT LED Ceiling Light will illuminate for 60 seconds when motion is detected within the sensor's range and then automatically turn off when there is no continuous activity.

The motion sensor light offers two selectable modes:

24 Hours Motion Sensor Mode (Mode #1): In this mode, the lamp detects motion activity throughout the day and night.

Dusk to Dawn Motion Sensor Mode (Mode #2): In this mode, the lamp detects motion activity only from dusk to dawn. However, if the lamp is used in a dark place (without sunlight or other light sources), it will continue to sense human activity.

The SINCELIGHT Motion Sensor Ceiling Light is designed to work only when motion is detected, and it is not a dusk-to-dawn light that always illuminates from dusk to dawn.

The product specifications are as follows: - Working Voltage: 85-265Vac, 50/60Hz, Worldwide Adaptable - Product Wattage: 18W - Equivalent Wattage: 160-180W - Beam Angle: 120° - Operating Temperature: -30°C to 45°C - Rated Life: 30,000 Hours - Power Factor: 0.9+

Color Temperature and Lumens: - Warm White (2700K): 1600 Lumens - Neutral White (4000K): 1800 Lumens - Cool White (6000K): 1800 Lumens - Customized CCT: 2000-7000K

The installation process is straightforward: 1. Cut off the power before installation. 2. Make two holes (about Φ6mm) according to the hole site of the back frame. 3. Mount the back frame fixture onto the ceiling or wall. 4. Pull the power cord through the frame and connect the wires. 5. Install the lamp onto the frame fixture and fix up the stopple. 6. Turn on the power, and the light will illuminate for about 20 seconds and then turn off. Keep the power on, and the installation is complete.

The PIR sensor may not function successfully in certain conditions, such as lack of movement or temperature change, detection of heat sources other than the human body, exposure to strong light sources, sudden temperature changes, or obstructions between the target and the sensor.

product information: